EM- 6700| RF Switch with Battery Pack
Categories: Uncategorized
The EM-6700 RF Switch is a low-noise, low-loss solution for manual control of fixed monitoring setups. The system consists of two modules: the RF Switching Unit and the (Optional) Battery Pack/Manual Control Unit. The RF switch can operate via USB power (+5V) from a host device, supporting Port 1/Port 2 commands, or independently using the…
Data Sheet
Details:
The EM-6700 RF Switch is a low-noise, low-loss solution for manual control of fixed monitoring setups. The system consists of two modules: the RF Switching Unit and the (Optional) Battery Pack/Manual Control Unit. The RF switch can operate via USB power (+5V) from a host device, supporting Port 1/Port 2 commands, or independently using the Battery Pack with push-button manual switching. Both modules are sealed for water and dust resistance, ensuring reliable operation in harsh environments.
Electrical
Frequency Range: 10MHz – 40GHz
VSWR: < 1.5:1 Typical, 3.5:1 Max Impedance: 50Ω, Nominal Insertion Loss: 2.5dB Typical, 10dB Max Isolation: >50dB Typical
Noise Figure: < 4dB Typical
P1dB: 31.5dBm Typical
IP3: 41.5dBm Typical
RF Input Power: 20 dBm Max
Connector: 2.92mm (F) (EM-6700 | 10MHz-40GHz)
Switch Architecture: SPDT Pin Diode
Battery Life: 36 Hours Nominal
Input Control: Manual Button, USB*
Mechanical
Dimensions RF Switch:
Width: 6.5 in. (165.0 mm)
Height: 2.5 in. (63.5 mm)
Depth: 5.5 in. (140.0 mm)
Weight: 1.87 lbs. (846g)
Dimensions Battery Pack/Manual Control Unit:
Width: 6.5 in. (165.0 mm)
Height: 2.5 in. (63.5 mm)
Depth: 6.3” (160.0 mm)
Weight: 3.2 lbs. (1460g)
Cables & Adapters
*All included
K576 AC Power cord
K571 Car Battery Charger Cable
K570 Control Cable
K572 Battery Charger/AC Adapter